When some people start using In-Ear Monitors they worry about feeling isolated from the audience. Some people think they can even try using only 1 in-ear.
This is a bad idea. A very bad idea. I understand that you don’t want to be cut off from the audience and I understand that in-ears sometimes have a reputation for making an artist feel isolated. But let’s just say that your fears are based more on a myth rather than a reality. It is true that in-ears will block -26db of ambient noise, but that’s far from going into an isolation chamber. And there are still plenty of ways to get ambient sound into your mix.
Ambient Sounds When On Stage
In all honesty, your stage setup will generally have enough bleed from the mics on stage to pick up the audience and stage noise. You’ll still hear your fans singing back to you and you’ll still be able to play off of their energy. But if that’s not enough, many engineers use at least 2 or 3 audience mics that are blended into the in-ear mix.
Since musicians tend to move around, good engineers will pan those in stereo as left, center and right so you can tell where the audience is in relation to your stage position. Another trick is to turn those audience mics up between songs to give you more interaction with the audience. As an aside, it is important to turn them back down during the song in order to clean up the mix. Too much ambient noise can muddy up the mix make it get a bit lost.
Ultimate Ears Ambient Sound Option
If that’s still not enough, you can order any of your in-ears to come with the built-in ambient feature. This is basically a controlled hole in the shell of the in-ear that allows the user to adjust how much ambient bleed they want to hear. If the hole is fully plugged, the in-ears operate normally. If you want it open, you can remove the plug and the stage noise and crowd noise will reach your eardrum through a -12db filter along with the critical in-ear mix.
But be warned. The low-end frequencies are dependent on having a complete seal. Once you open up your in-ears, you lose the low-end response. You’ll have to get those frequencies from wedges and side-fills while supplementing with an in-ear mix. You’ll have to play around and find your optimal ambient set-up. Keep in mind that we can not add the ambient feature to your custom ears after they have been made. But we can always remove the ambient feature if you prefer not to use it.
Should I Use The Ambient Feature With My IEMs?
Here’s the deal. The ambient feature works best for traditionally older bands who are more accustomed to playing with wedges. It is a happy marriage between older and newer technologies. The ambient feature is also good for bands who are just starting off on in-ears and who are worried about what it will sound and feel like. Think of it like this — ambient ports are more of a safety net than anything else. All in-ears are a sizable upfront investment and since the fear of being isolated is real, the option of having ambient stage noise helps to make the transition to in-ears possible. But once an artist gets comfortable with relying on an in-ear mix, more often than not, they opt to keep their in-ears fully sealed. For $50, the ambient feature is a great insurance policy. Does that make sense?
Now, back to your original question. When you have 1 ear fully sealed and one ear wide open, you are getting the worst of both worlds. And you are dealing with 2 totally different sound sources and sound pressure levels. Inevitably, your in-ear mix gets too loud. If the stage volume is 115db and one ear is in and one is out, you will turn up the in-ear to be as loud as or just a little louder than than your surrounding sound. Don’t do this. In time, this can and will damage your hearing. With the 26db of isolation it is different. If the stage volume is 115db then your in-ears level can be as low as 89db to keep up.
Most people will go a few db louder than their surrounding volume to get above it. So I would plan on the in-ear mix as being about 91db. Keep in mind that 3db is double the power level. So the difference between 118db and 91db is significant. Either commit to being fully sealed with 2 in-ears or use the ambient features with both ears.
Keep yourself in balance and keep your focus on your long-term health. We’ve all seen famous artists wearing only 1 in-ear on TV performances but that doesn’t make it right.